Products

This a replacement standard nose piece for use with the model GTI PSH05 Pocket Shear. Included are one (1) Nose Piece, one (1) rotating blade, and one (1) fi...

This a replacement 45º long nose piece for use with the model GTI PSH05 Pocket Shear. Included are one (1) Nose Piece, one (1) rotating blade, and one (1) fi...

These are replacement fixed cutting blades for 0.5″ diameter strand, and for use with the model PSB05-TH BatteryShear pocket shear.

These are replacement grippers for the 5DA1 20-ton double acting stressing ram and are for use with 0.5″ diameter strand.

These are replacement grippers for the 5DA1 20-ton double acting stressing ram and are for use with 3/8″ diameter strand.

This is a replacement handle for the 5DA1 gripper wedges.

These large diameter Tapcon screw cuts its own threads into concrete due to its high performance. The anchor bodies are zinc plated, Grade 5 and are construc...

This is a replacement 2” clevis pin that secures the handle of the EZ Feed Strand Winch to the mounting base.

This is a replacement 2” clevis pin that secures the Gripper Block to the handle of the EZ Feed Strand Winch.

Our stressing equipment is not provided with a current calibration report. However, we can have the new equipment calibrated for an additional $250.00 cost. ...

This 1” diameter high-speed grinding wheel is constructed with a 30/40 grit, and when used on a straight die grinder (such as the Milwaukee model 5196 11-Amp...

This 2” diameter high-speed grinding wheel is constructed with a 30/40 grit, and when used on a straight die grinder (such as the Milwaukee model 5196 11-Amp...

This 3” diameter high-speed grinding wheel is constructed with 30/40 grit, and when used on a straight die grinder (such as the Milwaukee model 5196 11-Amp D...

The EZ Ram Rack is a lightweight bracket used to support a stressing ram. It can be mounted on the concrete surface and positioned over stressing anchor pock...

The EZ Ram Rack is a lightweight bracket used to support a stressing ram. It can be mounted on the concrete surface and positioned over stressing anchor pock...

This tool can be useful when an existing tendon needs to be stressed and the tail of the tendon is too short to use a standard stressing jack. The Cable Pull...

This low-tech solution provides a simple and easy to use means of attaching fixed-end anchorages to post-tension tendons. Can be used with a variety of ancho...

The HST1 Hand Seating Tool can be used to help seat anchor wedges. The tool is designed to fit over the strand, and up against the wedges. This provides an e...

This reusable chuck includes spring loaded 3-piece jaws that are held together with a rubber O-ring. Also known as a “Speed Chuck”, this device can be used r...

These are replacement spring loaded 3-piece jaws held together with a rubber O-ring for the part #202652: Reusable Strand Chuck Assembly, ½” Strand “Speed Ch...

This is a plastic replacement grip for the 1" HST1 Hand Seating Tool.

The HST2 Hand Seating Tool can be used to help seat anchor wedges. The tool is designed to fit over the strand, and up against the wedges. This provides an e...

At only 1.5” in diameter, these Splice Couplers make barrier cable installations look sleek and less visually intrusive. Our post tension couplers are manufa...

This unique barrier cable splice can be used to join sections of strand and apply tension to the span from the splice. This splice measures 18” in length whe...