100% machined and assembled in the U.S.A.
Post-Tension Products
Our hardware has been subjected to and passed independent laboratory testing to ensure compliance with all applicable industry requirements. The manufacturing process for our products include regular in- house quality control inspections to ensure that our products conform to the critical performance criteria necessary for hardware used in post-tensioned construction.
Innovative equipment to help restore the structural integrity of post-tensioned concrete structures.
- LSG2 Post Tension Cable Grease 2.5 gallon
- LSG5 Post Tension Cable Grease 5 gallon
- SCLO2 Single-Cable Temporary Anchor, Long Slot
- FWLO1 Flat Wedge Lock-off Anchor – 3 cables
- FWLO2 Flat Wedge Lock-off Anchor – 2 cables
- FW1 Flat Wedges
- SGC300 .5″ sheathed & greased cable, 300’ Roll
- CSC1 EZ Cable Spool Cage for 300′ of ½”cable
- TP1 2″ wide sheathing tape
- MCLO1 Multi-cable Lock-off Anchor – 2 cavity
- MCLO2 Multi-cable Lock-off Anchor – 3 cavity
- SCLO1 Single Cavity Lock-off Anchor – ½” cable
- APS1 Anchor Pocket Seal – ½” cable
Unbonded post-tensioned hardware, such as anchors, splice couplers, and other materials used for tendon repairs.
- DBA50-SD Dog Bone Anchor, .5″
- CH50D Barrel Chuck,0.5″,1.45″ X 1.625″
- 204347 Pocket Former, 5ZV, MR, T/PS, 7/8 Shank
- 204333 Pocket Former, 5ZV, MR, T/PS, 45 DEG, Shank
- 247300-12 .5″ Z-Void Encapsulation Set, Metal Ring, SM1-05 (Complete Anchor Assembly)
- 206109 Grease Cap, LE/DE w/ Grease, Clear
- 201115 Wedge, 2 Piece. .5″, 1.2″ Long
- SPC1 Splice Cap – 1.5” pipe
- SPC2 Splice Cap – 2” pipe
- SC1 Splice Coupler – Bare steel, ½” cable
Tools / Replacement Parts
Specialty tools used for post-tension repairs, as well as parts for our post-tension repair hardware.
- CPT1 EZ Cable Pulling Tube 12″ length
- BSB1 Back Stressing Block
- VBS1-30/40 1” Vac Brazed Wheel on Stick
- VBS2-30/40 2” blade on Stick w slots 30/40 grit
- VBS3-30/40 3” blade on Stick w slots 30/40 grit
- LOIN1 Insert for all Multi-cable Lock-off Anchors
- LOIN2 Insert for the SCLO-001 Single Cavity Lock-off
- BUP1 Slotted Back-up Plate for SCLO
Barrier Cable Hardware
Hardware used to provide vehicular restraint and pedestrian fall protection in parking garages.
- SC2 Splice Couplers, Zinc Plated – 1/2″ cable
- BC50AS 0.5″ Adjustable Barrier Cable Splice Chuck
- BA1 Barrel Anchor – Washer End – Zinc plated, 1/2″ cable
- BC300 .5″ galvanized barrier cable, 300’ Roll
- NAA1 Non-adjustable Anchors – Zinc plated, ½” cable
- NAA2 Non-adjustable Anchors – for 3/4″ all thread
- ADA1 Adjustable Anchors – Zinc plated, ½” cable
Barrier Cable Embeds / Brackets
This is our propriety line of specially designed and fabricated components used to provide vehicular restraint and pedestrian fall protection systems in parking garages.
Our Guarantee
Design it, make it, test it, refine it, and then sell it.
Our approach to product development is based on decades of field experience as specialty post-tensioning contractors. Our core products are the result of in-house design, development, and manufacturing of items that we have routinely used in the field.
Made in America.
Post-Tensioned Products is proud to be part of the manufacturing resurgence in the United States. Our steel hardware, and our plastic parts are all fabricated and assembled in our home State of Florida. When you choose Post Tension Products, you’re not just buying hardware; you’re investing in innovation, reliability, and American craftsmanship.